Why Fridges and Washers Get Dented During a Move

Tips

A dent in a refrigerator door usually comes from a few seconds of contact: a door jamb on the way out, a stair rail on the turn, or another load shifting inside the truck. When a crew is moving large appliances, a heavy machine with thin steel panels has to pass through tight spaces, often on a tilt. A bare steel panel dents easily, and the repair is expensive. The customer also notices it the moment the fridge is back in place. If your crew handles fridges, washers, and dryers every week, protection and handling gear should be standard on every truck.

Below, we cover where the damage usually happens and which equipment prevents it.

Where Dents Start When Moving Large Appliances

The damage usually happens at one of these four points.

Door Frames

With a refrigerator, width is the first issue. In a tight doorway, even light contact can dent a side panel or bend a door handle. Measure the appliance and every doorway on the route before anyone lifts. A door sometimes has to come off, and it is better to learn that before the carry starts. In a very tight frame, pad the jamb as well as the appliance.

Strap Pressure

An appliance dolly strap has to be tight, and a tight strap on a bare panel can crease it. The dolly's rails can also mark the back of a machine if nothing sits between them and the finish.

Stair Turns

On stairs, the appliance is tilted and its weight shifts. At the landing, a corner can easily swing into a wall or banister.

Truck Transit

Appliances can rub against nearby furniture or strike a load that shifts during a stop. Most of these scuffs trace back to a missing cover or a loose strap on the truck.

Why does a fridge get dented when it's wrapped in a blanket? A loose pad can slide away from the panel during the carry, leaving the steel exposed at the exact moment it touches a frame.

How to Move Heavy Appliances Without Denting Them

Professional crews rely on three types of equipment to prevent this damage.

Padded Appliance Covers

Fitted covers stay in place better than a loose pad. There are two versions to stock. The padded form fit cover comes in appliance and dishwasher sizes, and the adjustable padded appliance cover adjusts to fit larger machines.

Cover

Listed Size

Listed For

Form Fit, Appliance

27" x 28" x 44"

Washers, dryers, and ranges of similar size

Form Fit, Dishwasher

24" x 35" x 27"

Dishwashers

Adjustable, Standard

Body 68" x 120", Top 45" x 45"

Refrigerators and tall appliances

Adjustable, Large

Body 68" x 140", Top 48" x 48"

Larger refrigerators

Check each machine's measurements against the listing before you order, as appliance sizes vary by brand and model.

Appliance Hand Trucks

A general-purpose dolly doesn't have the strap and padded rails needed for appliances. The Yeats appliance dolly is available with felt or plastic padding, and New Haven also carries Stevens appliance hand trucks. For regular stair carries, the Escalera motorized stair hand truck is built for moving heavy appliances up and down stairs, with a 1,200 lb capacity and a single up-down control switch.

Floor Protection

A fridge dragged across a kitchen can gouge the floor and catch on debris. Scuff Shields for appliances are laid on the floor along the appliance’s path and protect hardwood or vinyl from scratches, gouges, and roller marks. Several can be used together on a longer route.

Refrigerators and Washers Need Different Prep

Each machine has its own risks, so give each one its own checklist.

Refrigerator Prep

Once the customer has emptied the fridge, follow this sequence:

  1. Confirm the unit was unplugged early enough to defrost and dry. New Haven's guidance is six hours to two days, depending on the model.

  2. Disconnect and drain any water line to the ice maker or dispenser.

  3. Remove or secure shelves and drawers.

  4. Tape the doors closed and tape the cord to the back.

  5. Fit the cover, then strap the fridge to the appliance truck.

  6. Keep it as upright as possible for the entire trip.

Extra Fridge Tips

Experienced crews also follow a few habits with refrigerators:

  • Take the door handles off if the owner's manual allows it and a frame is tight.

  • Keep handles and small parts in a labeled bag taped to the back of the unit.

  • Check the route again after the fridge is covered, since padding adds width.

  • Photograph the panels before the cover goes on, so any existing marks are on record.

On the truck, strap the fridge upright against a wall, away from loads that could shift into it.

Can a refrigerator be transported on its side? Manufacturers strongly prefer upright, and waiting times after side transport vary by brand, so check the owner's manual before plugging the unit back in.

Washing Machine Prep

To protect the drum on a washing machine:

  • Shut off the water and disconnect and drain the hoses.

  • Reinstall the shipping bolts if the owner still has them, particularly on a front loader, and follow the manufacturer's instructions.

  • Secure the lid or door, then fit the cover.

  • Keep the washer upright on the truck.

Washer and Dryer Pairs

Treat a washer and dryer as two separate carries, and have a qualified technician disconnect any gas dryer. Load each one upright, cover it, and strap it to the truck wall so neither can shift during the drive.

Equip Every Truck Before the Next Appliance Job

One dented door can cost more than the cover that would have prevented it. Set a standard kit for each truck: fitted covers in both styles, an appliance hand truck, and Scuff Shields.

New Haven's range covers all of it, and the covers are made to slip on and off easily, so crews keep using them even on busy days. Order your appliance covers and hand trucks from New Haven now, ahead of your next refrigerator job.

Questions Crews Ask About Moving Appliances

  1. Which cover fits a 36-inch French door refrigerator?

Measure the fridge, then compare it with the listed sizes. The adjustable padded cover has the largest sizes, with bodies of 68" x 120" and 68" x 140".

  1. Our crew keeps scratching floors with loaded appliances. What fixes that?

Clean the floor first, then lay Scuff Shields along the route. Debris under the machine is what usually does the scratching.

  1. Can one mover take a fridge up the stairs?

New Haven describes the Escalera motorized stair hand truck as making one-person delivery safe and efficient. The crew should still follow its operating instructions.

  1. We hired movers for a kitchen remodel. What should we ask about our appliances?

Ask whether they bring padded appliance covers and a strapped appliance dolly. If they bring neither, ask how they plan to protect the finish.